1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material

$45.95
Write a Review
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material
1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material

1.75Mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material

$45.95
Write a Review
Color:
- +
Description

1.75mm PLA 3D Printer Filament Color Change with Temperature 31-45 Degrees Dark Green to Red to Yellow 3D Printing Material

Temperature Change Color Filament Introduction:

A. Temperature Change Color Filament is one type of color change filament, by mixing some Temperature changing color powder inside PLA.

B. PLA Temperature Change Color is a material will change color from one color to another color when exposed to a temperature of 33°C or higher. Even holding the part in your hand for a few moments will be enough to start the color transformation. Once the parts cools back down to room temperature, the color will go back to the original color.

C. This Temperature Change Color PLA is the same PLA as our standard PLA but with an included additive that will make your 3D printed object actually change color! Print settings are the same as standard PLA .

D. Suitable for assorted 3D printer, For Easy threed, For Makerbot, For UP, For Luzbot, For Leapfrog, For Reprap, For Ultimaker, For Mendel, For Prusa, For Raise3D , etc.



Note:

The filaments are all vacuum packaged, but the vacuum packaging may enter some air after being squeezed by other packages for long-distance transportation, this case it will not affect the normal use of the filament. (There is a desiccant in the vacuum package that can absorb water in the air ).

Temperature Change Color Type:

Color: Dark Gree to Red to Yellow, Brown to Green , Purple blue To pink , Green to Yellow

Brown Green -> Green (> 31℃)

Purple Blue -> Pink (> 33℃)

Green -> Yellow (> 33℃)



Temperature Change Color Specification:

1. Material: Temperature Change Color Filament

2. Critical Temperature: Around 31 degree centigrade

3. Color: 3 colors change and 2 color changes

4. Filament Diameter: 1.75mm

5. Tolerance: ±0.05mm

6. Print Temperature: 200~230℃

7. Infill Speed: 20-50mm/s

8. Heat-Bed Temperature:Not required but can be used(up to 50°C)

9. Density: 1.25±0.05g/cm3




Share on

You May Also Like

Quest 2 — Advanced All-In-One Virtual Reality Headset — 256 GBQuest 2 — Advanced All-In-One Virtual Reality Headset — 256 GB
Add To Bag

Quest 2 — Advanced All-In-One Virtual Reality Headset — 256 GB

$364.01
Women'S Casual Summer Sleeveless Mini Sexy Bodycon Tank Club DressWomen'S Casual Summer Sleeveless Mini Sexy Bodycon Tank Club Dress
Add To Bag

Women'S Casual Summer Sleeveless Mini Sexy Bodycon Tank Club Dress

$28.75
Multifunctional Wireless Charger Stand Pad Alarm Clock Speaker RGB Light Fast Charging Station for Iphone X 11 12 13 14 SamsungMultifunctional Wireless Charger Stand Pad Alarm Clock Speaker RGB Light Fast Charging Station for Iphone X 11 12 13 14 Samsung
Choose Options

Multifunctional Wireless Charger Stand Pad Alarm Clock Speaker RGB Light Fast Charging Station for Iphone X 11 12 13 14 Samsung

$19.94
For Xiaomi V168 Drone 8K 5G GPS Professional HD Aerial Photography Dual-Camera Omnidirectional Obstacle Avoidance Drone OriginalFor Xiaomi V168 Drone 8K 5G GPS Professional HD Aerial Photography Dual-Camera Omnidirectional Obstacle Avoidance Drone Original
Choose Options

For Xiaomi V168 Drone 8K 5G GPS Professional HD Aerial Photography Dual-Camera Omnidirectional Obstacle Avoidance Drone Original

$85.83
Portable Printers Wireless for Travel, Bluetooth Thermal Printer Compatible with Ios, Android, Laptop, Inkless Mobile Printer for Office, Home, SchoolPortable Printers Wireless for Travel, Bluetooth Thermal Printer Compatible with Ios, Android, Laptop, Inkless Mobile Printer for Office, Home, School
Add To Bag

Portable Printers Wireless for Travel, Bluetooth Thermal Printer Compatible with Ios, Android, Laptop, Inkless Mobile Printer for Office, Home, School

$106.69
Cute Bow Baby Boy Girls Winter Warm First Walkers Cotton Baby Booties Kids Toddler Slippers Baby First Walkers Crib ShoesCute Bow Baby Boy Girls Winter Warm First Walkers Cotton Baby Booties Kids Toddler Slippers Baby First Walkers Crib Shoes
Choose Options

Cute Bow Baby Boy Girls Winter Warm First Walkers Cotton Baby Booties Kids Toddler Slippers Baby First Walkers Crib Shoes

$5.85
More

Recently Viewed Products

Customer Reviews